ABS Automatic Infrared Sensor Hand Dryer (White) | High Jet Speed Hot & Cold | Chronovex
₹4,990.00 ₹6,690.00
ABS Automatic Hand Dryer (White) — infrared sensor, high-jet airflow, hot & cold dual mode. Dry hands in ~10–12 seconds. ABS body, 1800 W brushless motor, IPX1, ideal for offices, hotels, hospitals & airports.
- 💨 ~95 m/s jet airflow — high-speed brushless motor, 10–12 s dry time
- 🔥 Hot & Cold dual mode — 1800 W PTC heating element, switchable
- 👁️ Infrared sensor — fully touch-free, 200 ms response, 100–250 mm range
- 📦 HSN 8516 33 00 · GST 18% — 12-month warranty, pan-India dispatch
📍 Full buyer guide, FAQs & coverage map →
❓ Frequently Asked Questions
SKU:hand-dryer-abs
Categories:All Products, Hand Dryer
📊 Hand Dryer Variants — Pick the Right Model
Chronovex hand dryers are built for Indian washroom traffic patterns — from boutique cafes to airport terminals. Pick by daily footfall, body finish, and whether you need a heating element for winter comfort.
ABS Standard (Cold)
1100 W motor · cold-air only · ABS body · dry time ~15 s · IPX1
Best for: small offices, cafes, OPDs (low-to-medium traffic)
ABS Hot & Cold THIS PRODUCT
1800 W brushless motor · PTC hot-air · ABS white body · dry time ~10–12 s · jet ~95 m/s
Best for: hotels, hospitals, malls, restaurants (medium-to-high traffic)
You are viewing this model.
Stainless Steel Jet
2000 W brushless · SS-304 brushed body · dry time ~7–9 s · jet ~110 m/s · HEPA-ready
Best for: airports, premium malls, corporate HQs, food courts
Heavy-Duty Industrial
2300 W · cast-aluminium body · IPX4 · vandal-resistant · surge-protected
Best for: factories, railway stations, public restrooms, schools
🔍 At a Glance — How High-Speed Hand Drying Works
Conventional hand dryers (warm-air, 800–1000 W) take 30–40 seconds and rely purely on evaporation. The ABS Automatic uses a high-speed brushless motor to produce a ~95 m/s air jet that physically shears water off the skin — like a windshield wiper for hands. A built-in PTC heating element adds warmth on demand for winter months without driving the dry-time up. Result: 10–12 second dry cycle, ~70% less energy per dry vs warm-air models, and zero paper-towel cost forever.
The infrared proximity sensor activates the motor within 200 ms of hand presence (100–250 mm range) and shuts off cleanly when hands withdraw — fully touch-free, no buttons, no contamination vector in hygiene-critical washrooms.
⚙️ Technical Specifications
| Model | ABS Automatic Hand Dryer (White) |
|---|---|
| Motor | 1800 W brushless · ~25,000 RPM |
| Airflow speed | ~95 m/s jet at nozzle |
| Air volume | ~210 m³/h |
| Dry time | ~10–12 seconds (typical) |
| Heating element | PTC ceramic · switchable hot/cold |
| Sensor | Infrared proximity · 100–250 mm range · 200 ms response |
| Power input | 220–240 V AC · 50 Hz |
| Noise level | ~72 dB at 1 m |
| Body | ABS plastic · anti-yellow UV-stabilised · matte white |
| IP rating | IPX1 (drip-proof, indoor washroom) |
| Mounting | Wall-mount (rear plate + 4 anchor bolts) |
| Dimensions | ~280 × 220 × 175 mm |
| Weight | ~3.2 kg |
| Energy per dry | ~6 Wh (vs ~25 Wh for warm-air) |
| HSN / GST | 8516 33 00 / 18% |
| Warranty | 12 months (manufacturing defects) |
✨ Key Features
- Touch-free infrared sensor — zero contact, ideal for post-COVID hygiene protocols in hospitals, F&B, and offices.
- Hot & cold dual mode — switch off heat in summer (saves ~40% power); turn on in winter for comfort.
- High-jet ~95 m/s airflow — shears water off skin instead of evaporating; 10–12 s vs 30–40 s on legacy units.
- Brushless motor — rated for 500,000 cycles (vs ~150,000 for brushed); near-zero maintenance for 5+ years.
- ABS anti-yellow body — UV-stabilised plastic stays clean white even in harshly-lit washrooms.
- Drip tray + auto-off — 30-second motor auto-cutoff prevents jammed-sensor overheating.
📦 What’s in the Box
- 1 × ABS Automatic Hand Dryer (factory-tested, white)
- 1 × stainless rear-mount plate
- 1 × anchor-bolt & rawl-plug pack (4 sets)
- 1 × installation template (paper)
- 1 × user manual + GST tax invoice
🏢 Where It’s Used
- Hotels & restaurants — guest washrooms, banquet halls, back-of-house staff areas
- Hospitals & clinics — OPD washrooms, doctor changing rooms, pharmacy zones
- Offices & corporate HQs — IT parks, BPO floors, executive washrooms
- Schools & colleges — student blocks, faculty washrooms, hostel common areas
- Shopping malls & airports — high-footfall public restrooms (consider SS or industrial variant)
- Cloud kitchens & food halls — FSSAI hand-hygiene compliance points
🔧 Installation Best Practice
Mount the unit at 1.2–1.3 m height (nozzle to floor) on a load-bearing wall — ABS chassis is light but the motor torque needs solid anchor points. Use a dedicated 16 A switched socket with ELCB protection; do not share the circuit with electric water heaters. Keep 200 mm clearance below the unit so drip water falls onto a tiled floor or a drip tray (recommended in carpeted lobbies).
Avoid mounting directly opposite a mirror at < 600 mm distance — the jet airflow can spray micro-droplets onto the mirror. For ADA / accessibility compliance, add a second unit at 900 mm height for wheelchair users in larger washrooms.
❓ Quick FAQs
- How many dry cycles per day can the unit handle?
- The brushless motor is rated for ~500 cycles/day continuous over a 5-year service life. For airport / mall traffic (1000+ cycles/day), upgrade to the SS Jet or Industrial variant.
- Can I switch off the heating element?
- Yes — a back-panel toggle disables PTC heating, dropping power draw from 1800 W to ~1100 W. Recommended for summer use in non-AC washrooms.
- What’s the noise level?
- ~72 dB at 1 m — comparable to a vacuum cleaner. Acceptable for hospitality & healthcare washrooms; for libraries or quiet zones consider a low-noise variant.
- Is the sensor adjustable?
- Sensor range is factory-set at 100–250 mm. No field adjustment, but a sensor-mask sticker (provided on request) can reduce false triggers in narrow alcoves.
⚖️ High-Jet vs Warm-Air Hand Dryers
| High-Jet (this) | Warm-Air (legacy) | |
|---|---|---|
| Dry time | 10–12 s | 30–40 s |
| Motor | Brushless ~25,000 RPM | Brushed ~5,000 RPM |
| Jet speed | ~95 m/s | ~12 m/s |
| Energy per dry | ~6 Wh | ~25 Wh |
| Service life | ~500,000 cycles | ~150,000 cycles |
| Best for | Modern washrooms, hygiene zones | Low-budget legacy installs |
📦 Bulk & Multi-Site Orders
Ordering for a hotel chain, hospital group, IT-park property manager or school franchise? We dispatch 10–500 units in a single PO with consolidated GST invoice and AMC bundling. WhatsApp +91 99977 78202 for site-wise quote with installation routing.
🏆 Why Chronovex for Hand Dryers
Chronovex Industries Pvt. Ltd. is an ISO 9001:2015 certified Indian manufacturer of hygiene-zone equipment — air curtains, PVC strip curtains, insect killers and hand dryers — shipped pan-India from our Noida facility. Every ABS Automatic Hand Dryer ships factory-tested, with 12-month warranty, GST-compliant tax invoice and direct WhatsApp support from our engineering team.
🚚 Delivery & Coverage
Dispatch ex-Noida within 24–48 hours of confirmed PO. Standard transit: 2–3 days NCR & North India, 4–6 days South / East / West. AMC + on-site installation available in 20+ Indian cities through our service partner network.
📘 Glossary
- Brushless motor
- DC motor without carbon brushes — electronic commutation, 3× longer life, near-zero maintenance.
- PTC heating
- Positive Temperature Coefficient ceramic heater — self-regulating, fire-safe, instant-on.
- Jet speed (m/s)
- Air velocity at nozzle. >80 m/s is required to shear water off skin (vs evaporate).
- IPX1
- Ingress Protection — protected against vertically dripping water. Suitable for indoor washroom use.
- ABS
- Acrylonitrile Butadiene Styrene — impact-resistant engineering plastic. Anti-yellow UV-stabilised grade used in hand dryer chassis.
🔎 Detailed FAQs
- Will it work on Indian voltage fluctuations?
- Rated 220–240 V; tolerant of ±10% fluctuation. For sites with frequent spikes, we recommend a servo stabiliser — motor electronics are the only sensitive component.
- How is hygiene better than paper towels?
- Touch-free operation eliminates the bacterial transfer path of communal towel rolls or dispenser handles. Annual towel-cost savings typically pay back the unit within 8–12 months in medium-traffic washrooms.
- Can it splash water around the unit?
- The high jet shears water downward into a 200–300 mm splash zone. Tiled flooring is fine; for carpeted lobbies, install a small drip tray below the nozzle (available separately).
- What’s the realistic energy bill impact?
- At 200 dries/day × 6 Wh = 1.2 kWh/day ≈ ₹10/day at ₹8/unit. Versus paper towels at ~₹300/day for the same usage — typically 95%+ cost saving.
- Is it noisy enough to disturb hotel guests?
- 72 dB at 1 m drops to ~55 dB through a closed washroom door — audible but non-disturbing. For ultra-quiet luxury hotel applications, ask about our low-noise (< 65 dB) variant.
- What’s the realistic service life?
- Brushless motor: ~500,000 cycles. PTC element: 8–10 years. Sensor: 7–9 years. With 200 dries/day, expect 6–7 years before any component replacement.
📑 Related Buyer Guides
📖 Product Overview & Buyer Guide
Everything you need to choose, install and run the ABS Automatic Hand Dryer with confidence — in any Indian washroom.
ABS Automatic Infrared Sensor Hand Dryer (White) is Chronovex Industries’ high-jet, hot & cold washroom hand dryer — built for hotels, hospitals, offices, restaurants and educational campuses across India. A 1800 W brushless motor produces a ~95 m/s air jet that shears water off the skin in 10–12 seconds, while a fully touch-free infrared sensor (100–250 mm, 200 ms response) keeps the unit hygienic and contactless. Anti-yellow ABS body, IPX1 indoor rating, HSN 8516 33 00 (GST 18%), 12-month warranty.
🤔 Why High-Jet Beats Warm-Air & Paper Towels
Legacy warm-air dryers take 30–40 seconds, draw similar power, and leave hands clammy — which is why most users walk away half-dry and wipe on their clothes. Paper towels cost ₹200–300/day in a medium-traffic washroom and create a daily waste-management headache. The high-jet design solves both: 10–12 second dry time shears water mechanically, ~6 Wh per dry beats warm-air by ~70%, and zero consumables means typical payback in 8–12 months versus paper. Add fully touch-free infrared operation and you have the only modern answer for post-COVID hygiene-conscious washrooms.
📋 Quick Specs at a Glance
| Model ABS Automatic (White) | Motor 1800 W brushless, 25k RPM |
| Jet speed ~95 m/s at nozzle | Dry time ~10–12 seconds |
| Heating PTC ceramic, switchable | Sensor IR 100–250 mm, 200 ms |
| Power input 220–240 V · 50 Hz | Noise ~72 dB at 1 m |
| Body / IP ABS anti-yellow / IPX1 | Dimensions ~280 × 220 × 175 mm |
| HSN / GST 8516 33 00 / 18% | Warranty 12 months |
📍 Where Buyers Order This Across India
Chronovex dispatches ABS Automatic Hand Dryer units pan-India ex-Noida. Most-frequent buyer clusters are hospitality, healthcare and corporate hubs:
MumbaiDelhi NCRBengaluruPuneChennaiHyderabadKolkata
✨ What You Get with Every Order
| ✅ Factory-tested ABS unit | ✅ 12-month replacement warranty |
| ✅ GST tax invoice (HSN 8516 33 00) | ✅ Rear-mount plate + anchor pack |
| ✅ Pan-India dispatch in 24–48 hours | ✅ Installation template + manual |
| ✅ Direct WhatsApp engineering support | ✅ Bulk + AMC pricing for chains |
❓ Frequently Asked Questions
💨 How fast does it really dry hands, and how does that compare to legacy dryers?
Typical dry time is 10–12 seconds with the high-jet ~95 m/s airflow shearing water off the skin (not just evaporating it). Legacy warm-air units take 30–40 seconds — which is why most users walk away half-dry. The brushless 25,000 RPM motor + tight nozzle geometry is what makes the difference; PTC heat is comfort-only.
🔥 Can I switch off the heating element to save power in summer?
Yes — there is a back-panel toggle that disables the PTC ceramic heater. With heat off, power draw drops from 1800 W to ~1100 W (a ~40% reduction). Dry time is essentially unchanged because mechanical shearing, not evaporation, does most of the work. Many Indian properties leave heat OFF from April to September.
👁️ Is the infrared sensor reliable in dim or sunlit washrooms?
The IR sensor operates on a 100–250 mm detection range with a 200 ms response time and is shielded against ambient light. It works equally well in dim service-corridor washrooms and brightly-lit hotel lobbies. If you have direct sunlight hitting the sensor window (rare in indoor washrooms), a sensor-mask sticker is available on request to narrow the field of view.
🔊 Is 72 dB too noisy for hotels and offices?
~72 dB at 1 m drops to roughly 55 dB through a closed washroom door — audible but non-disturbing. This is the industry-standard high-jet range. For luxury hotels and libraries, ask about our low-noise (< 65 dB) variant. For factories, schools and railway stations, this unit is well within ambient-noise tolerance.
📜 HSN code, GST rate and tax-invoice details?
Electric hand dryers fall under HSN 8516 33 00 (electro-thermic appliances for hand-drying) at GST 18%. Every order ships with a GST-compliant tax invoice on Chronovex Industries Pvt. Ltd. letterhead — valid for ITC claim by registered buyers (hotels, hospitals, corporates).
🛠️ Installation, maintenance and can I order custom branding?
Mount on a load-bearing wall at 1.2–1.3 m height with a dedicated 16 A switched socket + ELCB. Maintenance is near-zero: wipe the ABS body weekly, vacuum the air-intake grill quarterly, and the brushless motor needs no servicing for ~500,000 cycles. For chain orders (10+ units), we offer custom silk-screen branding on the chassis, branded packaging, and AMC bundles. WhatsApp +91 99977 78202 for site-wise quote.
Frequently Asked Questions
Find answers to common questions about this product
Related products
₹230.00 ₹329.00
₹11,299.00 ₹16,799.00
₹1,550.00 ₹2,199.00
₹1,170.00 ₹1,699.00
₹4,950.00 ₹6,999.00
₹3,950.00 ₹5,699.00
