0 0
0
No products in the cart.

Air Curtain 5 Feet | SS Body SS304 (Standard Series)

₹33,659 ₹49,499

Air Curtain 5 Feet — SS304 Stainless (Standard)

  • Body: SS304 stainless steel — food-grade, corrosion-resistant, hygienic finish
  • Door coverage: 1.5 m × 2.4 m air barrier
  • Motor: 320 W · 3 motor / 5 blower
  • Airflow: 2,500 CFM (high) / 1,850 CFM (low) · 14 m/s outlet
  • Noise: ≤ 66 dB(A) at 1 m
  • Power: 220 V · single phase · 50 Hz
  • Use: Hygienic SS304 stainless air curtain — ideal for kitchens, F&B prep, dairies and clean-roo...
  • HSN: 8414 59 10 · GST invoice · ISO 9001:2015 Noida

↓ Full specs, FAQ & installation guide

❓ Frequently Asked Questions

How long does it take to install a 5 feet Standard SS304 air curtain?
Approximately 90-120 minutes for a standard above-door horizontal mount. The 5-feet SS304 unit weighs about 31.0 kg (heavier than aluminium because stainless steel is denser), so two-person mounting with proper lintel support is recommended up to 3.5 m ceiling height. Chronovex provides a free installation diagram and material test certificate (MTC) for the SS304 body on request — essential for FSSAI/USFDA audit dossiers. Technical helpline +91 99977-78202 walks your electrician through 230V/50Hz single-phase wiring if needed.
What is the running cost of this 5 feet Standard SS304 air curtain in rupees per hour?
At 320 W power draw and Rs 8 per kWh commercial electricity rate, the running cost is approximately Rs 2.56 per hour of single-speed operation. For a typical 14-hour kitchen or pharma cleanroom shift that's Rs 35.84. Compare with the HVAC load reduction (15-25% lower compressor cycling) plus the avoided cost of repeated CRCA/aluminium replacement in food-grade environments — net positive within 12 months on energy savings alone, even faster when factoring avoided FSSAI non-compliance penalties.
Why choose Standard SS304 over Aluminium or CRCA in food-grade or pharma environments?
SS304 grade 18/8 is the only food-safe and pharma-cleanroom-rated choice. FSSAI licensing requires food-contact-zone surfaces to be SS304 or better. USFDA audits flag CRCA and aluminium as non-compliant in formulation and packing zones. Schedule M / WHO-GMP mandates SS304 for primary product-contact areas. Aluminium handles general humidity but is not food-contact-rated. CRCA rusts within 12 months under chlorinated wash-down. SS304 stays inert indefinitely against acids, alkalis, salt spray, and steam-sanitation cycles. Standard tier gives you all that at ~25% lower price than Advanced SS304 (which adds 2-speed + IR remote + digital panel).
What is the payback period for a 5 feet Standard SS304 air curtain from energy savings alone?
Typical payback is 12 months for a 5-feet unit at a continuously-operated food-grade entrance (12-14 hours/day). The air curtain reduces HVAC compressor cycling by 15-25%, which translates to roughly Rs 108-Rs 179 per day in saved AC electricity. Add the avoided cost of replacing rusted CRCA every 12-18 months in food-grade environments and the payback can compress to under 8 months. Verified across deployments in Mumbai FSSAI kitchens, Hyderabad USFDA-audited pharma plants, and Anand dairy facilities.
What is the HSN code, GST rate, and tax invoicing for this Standard SS304 air curtain?
HSN code is 8414 59 10 (Industrial fans and blowers — air curtains category). GST rate is 18% IGST/CGST+SGST. Every Chronovex invoice is GSTR-2B compliant with e-invoice IRN and QR code embedded, so your CA can claim Input Tax Credit automatically through GSTN reconciliation. Material test certificate (MTC) for SS304 grade compliance is available on request — essential for FSSAI audit dossiers, USFDA inspections, and WHO-GMP documentation.
What warranty and after-sales support does Chronovex provide on Standard SS304 air curtains?
Standard warranty is 1 year on motors and electrical components, plus a 10-year shell warranty on the SS304 body against corrosion, pitting, and structural defects — industry-leading. Extended AMC contracts up to 5-7 years are available at the time of purchase. SS304 grade compliance MTC available on request for audit dossiers. WhatsApp +91 99977-78202 or support@chronovex.in for after-sales — response time under 2 hours during business hours, pan-India spare parts ship within 48 hours.
Standard kit selected (recommended)Change thickness / quality ▾
Series:
Door Width:
(Available)
Estimated delivery: Nov 03 - Nov 07
✔ ISO 9001:2015 certified✔ GST invoice (ITC)✔ Warranty card with every unit✔ Manufacturing since 2009
Supplied to: Aditya Birla Fashion & Retail · Parle Biscuits · Indo Nissin Foods · Encalm Hospitality · Regal Remedies · Maharaja Agrasen Hospital + 14 more
Quantity
✅ GST Invoice  ·  ✅ ISO 9001:2015  ·  ✅ Manufacturer Warranty  ·  ✅ Pan-India Delivery  ·  ⭐ 4.9/5 (45 Google reviews)  ·  Since 2009

Get a Callback / Quote on WhatsApp

We will message you on WhatsApp with pricing and availability.
Warranty & service
Already purchased? Register your unit Get your warranty activated within 24 hrs — Hinglish helpline available.
Register Now

SKU: SSXS5

Categories: Stainless Steel (SS304) Air Curtains

Standard vs Premium vs Advanced — what actually differs

For a given size, all three deliver the same airflow, wattage and CFM. The difference is not the specification — it is the grade of the components behind it. A 100% copper motor can be sourced at very different price points; the rating stays the same while life, durability and support do not. That grade is what separates these three series, and the onsite warranty reflects it.

StandardPremiumAdvanced
Best suited forShops, offices, showroomsHotels, malls, hospitalsFactories, warehouses, cold storage
Duty cycleRegular daily useExtended daily operation24×7 continuous
Motor gradeEntry-grade 100% copperHigher-grade 100% copperIndustrial premium-grade
Expected service life3–5 years8–10 years15–20 years
Onsite warranty1 year3 years5 years
Airflow / wattage / CFMSameSameSame

Body gauge and bearing type are common across the range; the difference lies in component quality and sourcing.

Is the 5 ft SS304 stainless steel Standard air curtain right for your door?

This model covers doors wider than 4 ft and up to 5 ft wide. The air curtain should be at least as long as the door opening, so the air stream covers the full width. It is typically used on double doors and wide entrances: supermarkets, hotel lobbies, showrooms and hospital entries. If your door is wider than 5 ft, choose the 6 ft model. Doors wider than 7 ft use two or more units side by side; the door size price finder works out the exact combination.

The SS304 stainless steel body is the right choice for food processing, pharma, commercial kitchens and wet or wash-down areas. Price for this model: ₹33,659, GST and installation included. The final quote is confirmed on WhatsApp after we see a photo of your door.

SS304 stainless steel Standard series: all sizes

SizeDoor widthPrice (GST + installation)
2 ftup to 2 ft₹17,819
3 ft> 2 ft to 3 ft₹23,539
1 m (3.3 ft)> 3 ft to 1 m (3.3 ft)₹24,639
4 ft> 1 m (3.3 ft) to 4 ft₹26,179
5 ft (this model)> 4 ft to 5 ft₹33,659
6 ft> 5 ft to 6 ft₹37,069
7 ft> 6 ft to 7 ft₹42,129

Other 5 ft options

Quick answers for the 5 ft model

Which door width does a 5 ft air curtain suit?
Doors wider than 4 ft and up to 5 ft wide. For a wider door, go to 6 ft.

Is installation included in the ₹33,659 price?
Yes. The price includes GST and standard installation. Send your door photo on WhatsApp to confirm the final quote.

When should I choose the SS304 stainless steel body?
The SS304 stainless steel body is the right choice for food processing, pharma, commercial kitchens and wet or wash-down areas.

Enter your door size - get the right air curtain and exact price
Air CurtainMagnetic PVC (AC room)PVC Strip Curtain

Prices live from our catalogue, GST-inclusive. Final quote is confirmed on WhatsApp after a door photo.

Product videos

Air curtain installation - step by stepAir curtain installation - step by step
Benefits of an air curtainBenefits of an air curtain
Chronovex air curtains, insect killers and PVC curtainsChronovex air curtains, insect killers and PVC curtains

The 5 ft SS304 Standard air curtain is built for doors up to 5 ft (1.5 m) wide. 3 copper motors and 5 cross-flow blowers deliver 2,500 CFM at up to 23 m/s on 320 W, enough to seal the full opening against hot air, dust and flies. The SS304 stainless steel body is made for food processing, pharma, commercial kitchens and wet or wash-down areas.

5 ft SS304 Standard at a glance

Door widthup to 5 ft (1.5 m)
Model no.SSX150
Dimensions1500 × 210 × 225 mm
Motors / blowers3 copper motors and 5 cross-flow blowers
Power320 W
Airflow (High / Low)2,500 / 1,850 CFM
Air velocityup to 23 m/s
Noise55 dB
Mount height2.3 – 3.3 m
Weight23 kg
HSN8414 59 10

Where the 5 ft model is used

Wide single doors and double doors: supermarkets, sweet shops, hotel lobbies, hospital and mall entrances.

5 ft vs the sizes next to it (SS304 Standard)

4 ft5 ft (this model)6 ft
Door widthup to 4 ftup to 5 ftup to 6 ft
Airflow2,000 CFM2,500 CFM3,000 CFM
Motors / blowers2 / 43 / 53 / 6
Power240 W320 W360 W

Included with the SS304 Standard series

copper motors; mounting kit and user manual; GST tax invoice with ITC eligibility. Volume pricing on 10+ units.

5 ft air curtain: common questions

Will a 5 ft air curtain cover a 5 ft door?
Yes. It matches the door width, and the 2,500 CFM stream covers the full opening when mounted at 2.3 – 3.3 m.

How much power does the 5 ft SS304 Standard use?
320 W on High speed.

My door is a little wider than 5 ft. What should I choose?
Go one size up to the 6 ft SS304 Standard (3,000 CFM).


★

No reviews available at the moment.

Frequently Asked Questions

Find answers to common questions about this product

Approximately 90-120 minutes for a standard above-door horizontal mount. The 5-feet SS304 unit weighs about 14.5 kg (heavier than aluminium because stainless steel is denser), so two-person mounting with proper lintel support is recommended up to 3.5 m ceiling height. Chronovex provides a free installation diagram and material test certificate (MTC) for the SS304 body on request — essential for FSSAI/USFDA audit dossiers. Technical helpline +91 9997778202 walks your electrician through 230V/50Hz single-phase wiring if needed.

At 320 W power draw and Rs 8 per kWh commercial electricity rate, the running cost is approximately Rs 2.56 per hour on high speed. For a typical 14-hour kitchen or pharma cleanroom shift that's Rs 35.84. Compare with the HVAC load reduction (15-25% lower compressor cycling) plus the avoided cost of repeated CRCA/aluminium replacement in food-grade environments — net positive within 12 months on energy savings alone, even faster when factoring avoided FSSAI non-compliance penalties.

SS304 grade 18/8 is the only food-safe and pharma-cleanroom-rated choice. FSSAI licensing requires food-contact-zone surfaces to be SS304 or better. USFDA audits flag CRCA and aluminium as non-compliant in formulation and packing zones. Schedule M / WHO-GMP mandates SS304 for primary product-contact areas. Aluminium handles general humidity but is not food-contact-rated. CRCA rusts within 12 months under chlorinated wash-down. SS304 stays inert indefinitely against acids, alkalis, salt spray, and steam-sanitation cycles. Standard tier gives you all that at ~25% lower price than Advanced SS304 (which adds industrial-grade components, a free automatic door sensor and a 5-year warranty).

Typical payback is 12 months for a 5-feet unit at a continuously-operated food-grade entrance (12-14 hours/day). The air curtain reduces HVAC compressor cycling by 15-25%, which translates to roughly Rs 108-Rs 179 per day in saved AC electricity. Add the avoided cost of replacing rusted CRCA every 12-18 months in food-grade environments and the payback can compress to under 8 months. Verified across deployments in Mumbai FSSAI kitchens, Hyderabad USFDA-audited pharma plants, and Anand dairy facilities.

HSN code is 8414 59 10 (Industrial fans and blowers — air curtains category). GST rate is 18% IGST/CGST+SGST. Every Chronovex invoice is GSTR-2B compliant with e-invoice IRN and QR code embedded, so your CA can claim Input Tax Credit automatically through GSTN reconciliation. Material test certificate (MTC) for SS304 grade compliance is available on request — essential for FSSAI audit dossiers, USFDA inspections, and WHO-GMP documentation.

Standard warranty is 1 year on motors and electrical components. Extended AMC contracts up to 5-7 years are available at the time of purchase. SS304 grade compliance MTC available on request for audit dossiers. WhatsApp +91 9997778202 or support@chronovex.in for after-sales — response time under 2 hours during business hours, pan-India spare parts ship the same day.